NDT Inspection Plugs
Nondestructive Testing (NDT) Plugs are engineered to allow repeat access for EPA/OSHA inspection and process safety management.
Plugs can be installed on insulated and non-insulated pipe, storage tanks, pressure vessels and petrochemical, oil and gas, steam and nuclear power generation facilities.
Engineered NDT2 inspection plugs consist of an elastomer sleeve, metal handle, metal cap, lanyard * and locking ring.
The elastomer sleeve consists of ethylene propylene (EPDM) or silicone (higher temps).
The metal caps are available in 304 Stainless Steel or 5052 Aluminum depending on the application.
* Plug Lanyards are critical when working in overhead environments.
Regular access to pipes and equipment benefits areas of process safety management:
Safety
NDT inspection plugs allow inspectors to safely access the inside of insulated pipes and equipment without removing the insulation. This helps to ensure the safety of the piping system.
Accuracy
Regular inspection access help ensure that Thickness Measurements are accurate. They also standardize the location of thickness measurements, which helps to protect the integrity of inspection data.
Use of NDT inspection plugs reduce the time required for periodic testing. Once installed, access often.
Corrosion
Inspection plugs provide a seal that can help protect against Corrosion under Insulation (CUI), chemical and UV exposure.